| 牌號 | X2CrMoTi17-1 |
|---|---|
| 1.4513 | |
| 對應標準 | NF EN 10028-7-2008
壓力容器用不銹鋼扁平產品 Flat products made of steels for pressure purposes - Part 7 : stainless steels |
| 歸類 | 鐵素體不銹鋼 |
-
高溫下的最小屈服強度
Material designation Heat treatment
conditionMinimum 0.2% proof strength Rp0.2,MPa
at a temperature (in°C) of:Name Number 50① 100 150 200 250 300 350 400 X2CrMoTi17-1 1.4513 +A - 250 240 230 220 210 205 200 ① Determined by linear interpolation.
-
熱處理指南
Material designation Hot forming Heat
treatment
symbolAnneailing Name Number Temperature
℃Type of
coolingTemperature①
℃Type of
coolingX2CrMoTi17-1 1.4513 1100 to 800 air +A 790 to 850 air,water ◎ a=air; o=oil; w=water.
◎ The temperatures of annealing should be agreed for simulated heat treated test pieces.
① If heat treatment is carried out in a continuous furnace, the upper part of the range specified is usually preferred, or even exceeded.
注：數據僅供參考！如有疑問，請?zhí)顚?xiě)"我要糾錯"！