III型 復合槽大扁頭螺釘 [TABLE 2.2.7-3 III] ASME B 18.6.3 (H7C-III) - 2024
| 選擇規格尺寸 點擊↓ 2# 3# 4# 5# 6# 8# 10# 12# 1/4 5/16 3/8 |
尺寸單位:
inch |
|
![ASME B 18.6.3 (H7C-III) - 2024 III型 復合槽大扁頭螺釘 [TABLE 2.2.7-3 III]](https://img.164580.com/upload/48/pic_cadpara/1519_zh.png?ue=1742575588&local=cache&tp=canvas&pict=png)
![美標ASME B18.6.3 (H7C-III) - 2024 ASME18.6 III型 復合槽大扁頭螺釘 [TABLE 2.2.7-3 III]](https://img.164580.com/upload/48/pic/2023/12/26/1703555822610670516.jpg)
![ASME B 18.6.3 (H7C-III) - 2024 III型 復合槽大扁頭螺釘 [TABLE 2.2.7-3 III]](https://img.164580.com/upload/48/qrcode_standardurl/24948.png)
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ①,若以小數規定公稱直徑，應省略小數前和小數點后第四位的零。 ②,方槽內壁略帶錐度，以保證插入深量規與有鍍層螺釘凹槽的配合。為使插入深測量深度適用于有涂鍍層的螺釘，制造者在生產（鐓頭）時，應為其留出必要的加工余量。 ③,表中的“R”表示正常插入深入。“S”表示短（淺）插入深度。 ④,由于復合槽導致材料填充不足，最小槽深比開槽大扁頭的槽深約小10%。 |
長度公差
Machine screws can be made to any length, but they are generally produced in fractional length increments of 1/16 in. for screws up to 5/8 in. long, 1/8 in. for screws over 5/8 in. through 1-1/2 in. long, and 1/4 in. for screws over 1-1/2 in. long.
標稱螺釘尺寸的長度公差 | |||
標稱螺釘長度 | 螺紋規格 | ||
0000~00 | 0~12 | 1/4~3/4 | |
≤1/2 | -0.01 | -0.02 | -0.03 |
＞1/2,≤1 | -0.02 | -0.03 | -0.03 |
＞1,≤2 | / | -0.06 | -0.06 |
＞2 | / | -0.09 | -0.09 |
類似標準及供貨信息
| 1 |
|
[美標] ASME/ANSI B 18.6.3 (T20) - 2010 |
十一字槽盤頭螺釘Table20 Combination Slotted-Cross Recessed Round Head Machine Screws 供應商(4) |
| 2 |
|
[企標] YJT 4016 |
塑料十一字槽圓柱頭頭部帶孔螺釘 Plastic Composit Slot Screws with Hole Through Cheese Head |
| 3 |
|
[美標] ASME B 18.6.3 (H5D) - 2024 |
復合十字槽盤頭螺釘 (ASTM F837, F468) [TABLE 2.2.5-4 I/IA/III] Combination Slotted-Pan Head Screws (ASTM F837, F468) [TABLE 2.2.5-4 I/IA/III] 供應商(4) |
| 4 |
|
[美標] ASME B 18.6.3 (T20) - 2013 |
復合十字槽盤頭螺釘 [Table 20] (ASTM F837, F468) Combination Slotted - Pan Head Screws (ASTM F837, F468) 供應商(4) |
| 5 |
![I型 復合槽大扁頭螺釘 [TABLE 2.2.7-3 I]](http://img.164580.com/upload/48/pic/2023/11/23/1700706833679115634.jpg)
|
[美標] ASME 18.6.3 (H7C-I) - 2024 |
I型 復合槽大扁頭螺釘 [TABLE 2.2.7-3 I] Combination Slotted Truss Head Screws - Type I [TABLE 2.2.7-3 I] |
| 6 |
![十字復合槽六角凸緣頭螺釘 [TABLE 2.2.10-3]](http://img.164580.com/upload/48/pic/2023/11/17/1700209985612005044.jpg)
|
[美標] ASME B 18.6.3 (H10C) - 2024 |
十字復合槽六角凸緣頭螺釘 [TABLE 2.2.10-3] Combination Slotted Type I Indented Hex Washer Head Screws [TABLE 2.2.10-3] |
| 7 |
![復合十字槽圓頭螺釘 [TABLE 2.2.11-3]](http://img.164580.com/upload/48/pic/2023/11/20/1700467297944812968.jpg)
|
[美標] ASME B 18.6.3 (H11C-I/H11C-IA) - 2024 |
復合十字槽圓頭螺釘 [TABLE 2.2.11-3] Combination Slotted Round Head Screws [TABLE 2.2.11-3] |
| 8 |
|
[美標] ASME B 18.6.3 (T34) - 2013 |
十字復合槽六角凸緣頭螺釘 Combination Slotted Type I Indented Hex Washer Head Screws |
| 9 |
|
[美標] ASME B 18.6.3 (T37-I T37-IA) - 2013 |
復合十字槽圓頭螺釘 Combination Slotted Round Head Screws |
| 10 |
|
[美標] ASME B 18.6.3 (T26-I) - 2013 |
I型復合槽大扁頭螺釘 Combination Slotted Truss Head Screws，Type I |
| 11 |
|
[美標] ASME B 18.6.3 (T26-III) - 2013 |
III型復合槽大扁頭螺釘 Combination Slotted Truss Head Screws，Type III |