會員中心 | English | 繁體中文

C級高強度鋼結構栓接用大六角頭螺栓（大對邊短螺紋） 8.8和10.9級 ISO 7412 - 1984

選擇規格尺寸點擊↓

M12

M16

M20

(M22)

M24

(M27)

M30

M36

括號內尺寸為非優選

ISO 7412 - 1984 C級高強度鋼結構栓接用大六角頭螺栓（大對邊短螺紋） 8.8和10.9級

尺寸單位: mm

國際ISO 7412 - 1984 ISO7412 7412ISO C級高強度鋼結構栓接用大六角頭螺栓（大對邊短螺紋） 8.8和10.9級

掃一掃分享

單重計算公差公制螺紋極限尺寸米/英制螺紋對照螺紋直徑與受力截面積最小破壞扭矩牌號等級 毛坯直徑

螺紋規格
d

M12

M16

M20

(M22)

M24

(M27)

M30

M36

P	螺距
b	L≤100mm
b	L＞100mm
c	最大值
c	最小值
d_a	最大值
d_s	最大值
d_s	最小值
d_w	最小值
e	最小值
k	公稱
	最大值
	最小值
k₁	最小值
r	最小值
s	最大值
s	最小值

1.75	2.0	2.5	2.5	3	3	3.5	4
25	31	36	38	41	44	49	56
32	38	43	45	48	51	56	63
0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8
0.4	0.4	0.4	0.4	0.4	0.4	0.4	0.4
14.7	18.7	23.24	25.24	27.64	31.24	34.24	41
12.70	16.70	20.84	22.84	24.84	27.84	30.84	37.00
11.30	15.30	19.16	21.16	23.16	26.16	29.16	35.00
19.2	24.9	31.4	33.3	38	42.8	46.5	55.9
22.78	29.56	37.29	39.55	45.2	50.85	55.37	66.44
7.5	10	12.5	14	15	17	18.7	22.5
7.95	10.75	13.40	14.90	15.90	17.90	19.75	23.55
7.05	9.25	11.60	13.10	14.10	16.10	17.65	21.45
4.9	6.5	8.1	9.2	9.9	11.3	12.4	15
0.6	0.6	0.8	0.8	1	1.2	1.2	1.5
21	27	34	36	41	46	50	60
20.16	26.16	33	35	40	45	49	58.8

螺紋長度b

①,dw_最大值= S_{實際值}

替代列表

暫無

等效標準

國標 GB	國際 ISO
GB /T 18230.2	ISO 7412

以上有部分標準可能為近似等效，如有異議以標準原件為準

工藝相關

ISO 261

普通螺紋直徑與螺距系列

ISO 1461

金屬覆蓋層鋼鐵制件熱浸鍍鋅層技術要求及試驗方法

緊固件公差 Part1:螺栓、螺釘、螺柱和螺母產品等級 A、B和 C級

ISO 4775

高強度鋼結構栓接用 - B級 - 大六角螺母（大對邊）- 8、10級

技術條件和引用標準

材料
螺紋	公差
	標準
機械性能	等級
	標準
表面處理	常規
	可選^③
公差	產品等級
	標準
Acceptability
Associated nuts
Associated plain hole washers
Associated chamfered hole washers
備注

鋼
6 g^①
ISO 261、ISO 965
8.8	10.9
ISO 898/1
Black oxide^②
Zinc electroplated^④ Cadmium electroplated^④ Hot-dip galvanized to ISO 1461	Zinc electroplated^⑤ Cadmium electroplated^⑤ Hot-dip galvanized to ISO 1461^⑥
C except：c, d_w(0.95 s_min) and r. Tolerance for lengths over 180 mm : ± 4.0 mm.
ISO 4759/1
For acceptance procedure, see ISO 3269.
ISO 4775 or ISO 7414
ISO 7415
ISO 7416
① The tolerance class specified applies before electroplating or hot-dip galvanizing. Hot-dip galvanized bolts may also be supplied by agreement between the user and the manufacturer, having screw threads which after galvanizing shall be accepted by a GO gauge of the basic thread size, i.e. the bolt threads are undersized before galvanizing to tolerance class 6az to accommodate the zinc coating. These bolts are designated and marked 8.8S U or 10.9S U ( see also clauses 6 and 7 ). Tolerance class 6az is in the course of preparation, but in the interim the screw thread dimensions are given in annex A. ② Black oxide means the normal finish resulting from manufacture with a light coating of oil. ③ Other coatings may be negotiated between the purchaser and the manufacturer provided they do not impair the mechanical properties. ④ This will be the subject of a future International Standard. ⑤ Precautions to avoid hydrogen embrittlement may be necessary. Reference should be made to the future International Standard dealing with electroplating of threaded components. ⑥ Precautions to avoid hydrogen embrittlement may be necessary.

引用參考

GB /T 1172

黑色金屬硬度及強度換算值

GB /T 5267.1 - 2002

鍍鋅、鍍鎳、鍍鎘、復合鍍等層鍍層鹽霧腐蝕的防護性能

GB /T 193 - 2003

普通螺紋（一般用途米制螺紋）- 直徑與螺距系列 (ISO 261: 1998, MOD)

GB /T 3106 - 2016

緊固件 - 螺栓、螺釘和螺柱 - 公稱長度和螺紋長度 (ISO 888:2012, MOD)

GB /T 12603 - 2005

金屬熱處理工藝分類及代號

GB /T 3 - 1997

普通螺紋收尾、肩距、退刀槽和倒角 (ISO 3508:1976 / ISO 4755:1983)

GB /T 5779.1 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 一般要求

GB /T 5779.3 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 特殊要求

GB /T 3103.1 - 2002

緊固件公差（螺栓、螺柱、螺釘和螺母）

GB /T 34632 - 2017

統一螺紋搓制和滾制前的毛坯直徑

注：技術數據僅供參考，請以官方原件為準！

類似標準及供貨信息

1	[國標] GB /T 1231 (bolt) - 2024	鋼結構用高強度大六角頭螺栓 High Strength Bolts with Large Hexagon Head Assemblies for Steel Structures 供應商(5)
2	[國標] GB /T 9125.1 - 2020	管法蘭連接用六角頭螺栓 PN系列 Hex Bolt for Pipe Flange Connection - PN Designated 供應商(1)
3	[國標] GB /T 9125.2 - 2020	管法蘭連接用六角頭螺栓 Class系列 Hex Bolt for Pipe Flange Connection - Class Designated 供應商(1)
4	[國標] GB /T 16939 - 2016	鋼網架螺栓球節點用高強度螺栓 High Strength Bolts for Joints of Space Grid Structures 供應商(1)
5	[國標] GB /T 9125 - 2010	管法蘭連接用六角頭螺栓 Hex Bolt for Pipe Flange Connection 供應商(1)
6	[國標] GB /T 1228 - 2006	鋼結構用高強度大六角頭螺栓 High Strength Bolts with Large Hexagon Head for Steel Structures 供應商(5)
7	[國標] GB /T 9125 - 2003	管法蘭連接用六角頭螺栓 Hex Bolt for Pipe Flange Connection 供應商(1)
8	[國標] GB /T 16939 - 1997	鋼網架螺栓球節點用高強度螺栓 High Strength Bolts for Joints of Space Grid Structures 供應商(1)
9	[國標] GB /T 1228 - 1991	鋼結構用高強度大六角頭螺栓 High Strength Bolts with Large Hexagon Head for Steel Structures 供應商(5)
10	[國標] GB /T 32076.3 - 2015	預載荷高強度栓接結構連接副第3部分 HR型大六角頭螺栓 High-Strength Structural Bolting Assemblies for Preloading-Part 3:System HR-Hexagon Bolt with Large Width Across Flats
11	[國標] GB /T 32076.4 - 2015	預載荷高強度螺栓結構連接副第4部分 HV型大六角頭螺栓 High-Strength Structural Bolting Assemblies for Preloading - Part 4:System HV-Hexagon Bolt with Large Width Across Flats
12	[國標] GB /T 32076.7 - 2015	預載荷高強度螺栓結構連接副第7部分 HV型大六角頭螺栓M39～M64 High-strength Structural Bolting Assemblies for Preloading-Part 7:system HV-Hexagon Bolt with Large Width Across Flats And Nut Assemblies M39～m64
13	[國標] GB /T 18230.1 - 2000	栓接結構用大六角螺栓 (螺紋長度按GB/T 3106) - C級 - 8.8級和10.9級 Hexagon Bolts for Structural Bolting with Large Width Across FLats(Thread Lengths accroding to GB/T 3106) - Product Grade C - Property Classes 8.8 and 10.9
14	[國標] GB /T 18230.2 - 2000	栓接結構用大六角螺栓短螺紋 C級 8.8和10.9級 Hexagon Bolts for High-strength Structural Bolting with Large Width Across Flats (Short Thread Length) - Product Grade C - Property Classes 8.8 and 10.9
15	[美標] IFI 149 - 2000	重型大六角頭螺栓 Large Size Heavy Hex Screws
16	[德標] DIN 6914 - 1989	鋼結構大六角螺栓 High-Strength Hexagon Bolts with Large Widths Across Flats for Structural Bolting 供應商(6)
17	[德標] DIN 7990 - 2017	鋼結構用帶六角螺母的六角頭螺栓 Hexagon Head Bolts with Hexagon Nut for Steel Structures
18	[德標] DIN 7990 - 2008	鋼結構用帶六角螺母的六角頭螺栓 Hexagon Head Bolts with Hexagon Nut for Steel Structures
19	[德標] DIN 7990 - 1989	鋼結構用帶六角螺母的六角頭螺栓 Hexagon Head Bolts with Hexagon Nut for Steel Structures
20	[國際] ISO 7411 - 1984	C級高強度鋼結構栓接用六角頭螺栓（螺紋長度根據ISO 888） 8.8和10.9級 Hexagon Bolts for High-Strength Structural Bolting with Large Width Across Flats (Thread Lengths According to ISO 888) - Product Grade C - Property Classes 8.8 and 10.9 供應商(1)
21	[日標] JIS B 1186 - 2013	高強度連接用六角頭螺栓 High Strength Hexagon Bolts for Friction Grip Joints
22	[日標] JIS B 1186 - 1995	高強度連接用六角頭螺栓 High Strength Hexagon Bolts for Friction Grip Joints
23	[機械行業] JB /T 9150 - 1999	防松螺栓連接副 - 螺栓（配合防松螺栓連接副螺紋卡頭使用） Preventing Loose Bolt Connecting Assembly-Bolt
24	[機械行業] JB /T 9150 - 1999	防松螺栓連接副 - 螺紋卡頭（配合防松螺栓連接副螺栓使用） Preventing Loose Bolt Connecting Assembly - Bolt Connector
25	[美標] ASME/ANSI B 18.2.3.7M - 2006	米制重型六角結構螺栓 Metric Heavy Hex Structural Bolts 供應商(1)
26	[美標] ASME/ANSI B 18.2.3.3M - 2001	米制重型外六角螺栓 Metric Heavy Hexagon Bolts
27	[歐標] EN 14399-3 (Bolt) - 2015	預負載用高強度結構螺栓連接副，第3部分：HR系統 - 六角螺栓 High-strength Structural Bolting Assemblies for Preloading - Part 3: System HR — Hexagon Bolt 供應商(4)
28	[歐標] EN 14399-4 (Bolt) - 2015	預負載用高強度結構螺栓連接副，第4部分：HV系統 - 六角螺栓 High-Strength Structural Bolting Assemblies for Preloading - Part 4: System HV - Hexagon Bolts 供應商(2)
29	[歐標] EN 14399-4 (Bolt) - 2005	預負載用高強度結構螺栓連接副，第4部分：HV系統 - 六角螺栓 High-Strength Structural Bolting Assemblies for Preloading - Part 4: System HV - Hexagon Bolts 供應商(2)
30	[意大利] UNI 5712 - 1975	鋼結構用高強度大六角頭螺栓 - ISO 公制粗牙螺紋 High-strength Large Hexagon Bolts for Structural Engineering - ISO Metric Coarse Thread 供應商(1)
31	[法國] NF E 25-801-3 - 2005	鋼結構用高強度大六角頭螺栓 High Strength Bolts with Large Hexagon Head for Steel Structure
32	[法國] NF E 25-801-4 - 2005	鋼結構用高強度大六角頭螺栓 High Strength Bolts with Large Hexagon Head for Steel Structure
33	[英標] BS 4395-1 - 1969	米制高強度大六角頭螺栓 Table 5 Metric High Strength Large Hexagon Head Bolts
34	[英標] BS 1769 - 1951	大六角頭鍛造螺栓(統一螺紋) Unified Hexagon Head Forged Bolts
35	[美標] ASTM A325M - 2009	經熱處理的最小抗拉強度為830 MPa的鋼制結構螺栓規格（米制） Standard Specification for structural bolts,steel,heat treated 830MPa minmum tensile strength(metric) 供應商(1)
36	[澳標] AS /NZS 1252.1 - 2016	高強度六角頭螺栓 High-Strength Steel Bolts 供應商(2)
37	[澳標] AS /NZS 1252 - 1996	米制鋼結構用高強度大六角頭螺栓 High-Strength Steel Bolts 供應商(2)
38	[鐵道部] TB /T 2347 - 1993	鋼軌用8.8級和10.9級高強度絕緣接頭螺栓供應商(1)
39	[臺灣] CNS 3124 - 1987	鋼結構用六角頭螺栓 Hexagon Head Bolts for Steel Structures
40	[臺灣] CNS 4366 - 1987	高預力連接鋼結構用大六角頭螺栓(大對面寬度) Hexagon Bolts with Large Widths Across Flats for Steel Structures
41	[臺灣] CNS 11328 - 1985	摩擦結合用高強度六角頭螺栓 High Strength Friction Grip Hexagon Bolts
42	[俄標] GOST 32484.3 - 2014	鋼結構用高強度六角頭螺栓 HR型 High-strength Structural Bolting Assemblies for Preloading-system HR-Hex Bolt
43	[俄標] GOST R 52644 - 2006	高強度六角頭螺栓 Hexagon Bolts for High-Strength Structural Bolting with Large Width Across Flats - Product Grade C - Property Classes 8.8 and 10.9
44	[企標] YJT 1006	管片螺栓
45	[電力] DL /T 764.4 - 2002	輸電線路鐵塔用熱浸鋅螺栓 Hot Dip Galvanizing Bolts for Tower of Transmission Lines
46	[建筑] JG /T 5057.1 - 1995	建筑機械與設備高強度六角頭螺栓 Construction Machinery and Equipment - High Strength Hexagon Head Bolts
47	[建筑] JG /T 5057.2 - 1995	建筑機械與設備高強度全螺紋六角頭螺栓 Construction Machinery and Equipment - High Strength Bolts with Hexagon Head - Full Thread
48	[建筑] JG /T 5057.3 - 1995	建筑機械與設備細桿高強度六角頭螺栓 Construction Machinery and Equipment - High Strength Bolts with Hexagon Head - Reduced Shank
49	[建筑] JG /T 5057.4 - 1995	建筑機械與設備高強度大六角頭螺栓 Construction Machinery and Equipment - High Strength Bolts with Large Hexagon Head
50	[建筑] JG /T 5057.5 - 1995	建筑機械與設備高強度細牙六角頭螺栓 Construction Machinery and Equipment - High Strength Bolts with Hexagon Head - Fine Pitch Thread
51	[德標] DIN EN 14399-4 (Bolt) - 2015	預負載用高強度結構螺栓連接副，第4部分：HV系統 - 六角螺栓 High-strength Structural Bolting Assemblies for Preloading - Part 4: System HV - Hexagon bolts 供應商(6)
52	[印標] IS 3757 - 1985	高強度結構螺栓 High Strength Structural Bolts
53	[美標] ANSI B 18.2.3.6M (J1199,F568,A962,A320) - 1979 (R2006)	米制重型六角頭螺栓 Metric Heavy Hex Bolts 供應商(1)
54	[美標] ASME B 18.2.6 - 2019	大六角頭結構用螺栓 (ASTM F3125 / F3125M) Heavy Hex Structural Bolts (ASTM F3125 / F3125M) 供應商(1)
55	[美標] ASME B 18.2.1 (T3) - 2012	大六角頭螺栓 [Table 3] (ASTM A307 / A394) Heavy Hex Bolts [Table 3] (ASTM A307 / A394) 供應商(6)
56	[美標] ASME B 18.2.1 (T7) - 2012	大六角頭螺釘 [Table 7] (ASTM A193 / A320 / A394) Heavy Hex Screws [Table 7] (ASTM A193 / A320 / A394) 供應商(2)
57	[美標] ASME B 18.2.6M - 2012	米制重型六角結構螺栓 (ASTM A 325M / ASTM A 490M) [Table 1] Metric Heavy Hex Structural Bolts (ASTM A 325M / ASTM A 490M) 供應商(1)
58	[美標] ASME B 18.2.1 (T3) - 2010	大六角頭螺栓 [Table 3] Heavy Hex Bolts [Table 3] 供應商(6)
59	[美標] ASME B 18.2.1 (T7) - 2010	大六角頭螺釘 [Table 7] Heavy Hex Screws [Table 7] 供應商(2)
60	[美標] ASME B 18.2.6 - 2010	大六角頭結構用螺栓 (ASTM A 325 / ASTM A 490) [Table 1] Heavy Hex Structural Bolts (ASTM A 325 / ASTM A 490) 供應商(1)
61	[美標] ASME B 18.2.6 - 2006	鋼結構用大六角頭螺栓 (ASTM A 325 / ASTM A 490) [Table 2] Heavy Hex Structural Bolts (ASTM A 325 / ASTM A 490) 供應商(1)
62	[能源行業標準] NB /T 31082 - 2016	風電機組塔架用高強度螺栓連接副——六角頭螺栓 High-strength Bolting Assemblies for Tower on Wind Turbine - Hexagon Head Bolts 供應商(2)
63	[德國鋼結構委員會] DASt 021 - 2006	熱鍍鋅緊固件 - DIN 6914, DIN 6915, DIN 6916 六角螺栓(M39~M64) Screw Connections Made of Hot-dip Galvanized Sets M39 to M64 Accordingly DIN 6914, DIN 6915, DIN 6916

国产精品成人网站,亚洲精品午夜国产va久久成人,夜夜夜夜,古代全肉高h春药

C級高強度鋼結構栓接用大六角頭螺栓（大對邊 短螺紋） 8.8和10.9級 ISO 7412 - 1984

工藝相關

技術條件和引用標準

引用參考

C級高強度鋼結構栓接用大六角頭螺栓（大對邊短螺紋） 8.8和10.9級 ISO 7412 - 1984